20-02-2019, 01:48 PM
(This post was last modified: 20-02-2019, 01:56 PM by Murphyv310.)
Nice simple turntables. Remove the cam gear and check the plastic bearing in the centre isn't worn and the cam tracks haven't broken. Make sure the levers are free and not binding. Grease the tracks and centre spindle and cam gear with white lithium grease. You shouldn't need a manual for these, they are about as simple as you'll get.
The basic mech is now around 30 years old so wear is the most likely issues.
The basic mech is now around 30 years old so wear is the most likely issues.
