09-02-2019, 09:43 AM
I`ve got a few questions to ask on this subject and I admit I know little about splitters so please excuse my ignorance.
For a while now I`ve been thinking of building a distribution network to run my sets and have been gathering BNC connectors and broadcast quality cable .
I am also going to make the splitter boxes and have the chassis mount BNC connectors.
My questions are ,
1/ What value resistors will I need to split the aurora output 8 ways ?
2/ If I used say 3 outputs from an 8 way splitter , will I get less gain than if I used all 8 ?
3/ Are you putting a strain on the aurora by running 8 tv`s from it ?
I have no planes to use an amplifier at the moment .
Robin
For a while now I`ve been thinking of building a distribution network to run my sets and have been gathering BNC connectors and broadcast quality cable .
I am also going to make the splitter boxes and have the chassis mount BNC connectors.
My questions are ,
1/ What value resistors will I need to split the aurora output 8 ways ?
2/ If I used say 3 outputs from an 8 way splitter , will I get less gain than if I used all 8 ?
3/ Are you putting a strain on the aurora by running 8 tv`s from it ?
I have no planes to use an amplifier at the moment .
Robin
