10-12-2018, 11:46 AM
Hi Everyone,
I think I have got the wrong thing. I was trying to get the capacitor to replace the one that goes from the cathode on the output valve to the grid. I have got 3 x 4n7Fs ceramic 250/440V.
What it seems to be is labelled C46 and is an electrolytic one of 50muF +ve to cathode and 12V..
Before I launch into a purchasing spree I would greatly appreciate it if someone could check the circuit diagram and correct me if I am wrong.
The hint is that it is in parallel with a resistor of 150 ohms.
Thanks!
I think I have got the wrong thing. I was trying to get the capacitor to replace the one that goes from the cathode on the output valve to the grid. I have got 3 x 4n7Fs ceramic 250/440V.
What it seems to be is labelled C46 and is an electrolytic one of 50muF +ve to cathode and 12V..
Before I launch into a purchasing spree I would greatly appreciate it if someone could check the circuit diagram and correct me if I am wrong.
The hint is that it is in parallel with a resistor of 150 ohms.
Thanks!
