Well it works, and is quite good for a 3 valve TRF.
I had some troubles with the HF valve socket contacts but it seems to have settled down.
I tested it using a restored and modified EKCO battery eliminator. It supplies 2v (or 1.4v) and various HT and SG settings. For this test I had it switched to low voltage which gave me 63v and 124v for HT1 and HT2
https://youtu.be/KnbIiY0tUbE
Mike
I had some troubles with the HF valve socket contacts but it seems to have settled down.
I tested it using a restored and modified EKCO battery eliminator. It supplies 2v (or 1.4v) and various HT and SG settings. For this test I had it switched to low voltage which gave me 63v and 124v for HT1 and HT2
https://youtu.be/KnbIiY0tUbE
Mike
