22-10-2018, 12:47 PM
I must get round to finishing the electrical side of this charger. At least to the point where I get a nice glow.
Can't find the spare mercury vapour rectifier despite a search. It will turn up when I'm not looking. At least the old one has some life in it.
Reckoned the DIN rail wasn't going to be secure enough so I bought some C section ali from Homebase.Photo shows the back panel of the charger and wall mount. The blue glow is a reflection from nearby painted surfaces. The 2 woodscrews at the ends of the wall mount stop the charger sliding out sideways.
Can't find the spare mercury vapour rectifier despite a search. It will turn up when I'm not looking. At least the old one has some life in it.
Reckoned the DIN rail wasn't going to be secure enough so I bought some C section ali from Homebase.Photo shows the back panel of the charger and wall mount. The blue glow is a reflection from nearby painted surfaces. The 2 woodscrews at the ends of the wall mount stop the charger sliding out sideways.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
