02-10-2018, 11:44 AM
So far I have amassed info on over 150 'appliance' connectors with varying amounts of data on each, but at least there are links to pictures of most of them. The 150 covers both mains and DC power applications.
I have run into a bit of a brick wall with the Jones and Painton series of plugs and sockets. There seems to be confusion about which is which. This is complicated even further by references to a 'miniature' Jones series. The links below explain the problem better than I can.
https://www.belfuse.com/product-detail/i...ones-plugs
https://www.vintage-radio.net/forum/show...p?t=138553
https://www.vintage-radio.net/forum/show...p?t=111661
So far I have been unable to track down a spec sheet or dimensional drawing of the original series as used on T1154/R1155 etc. Can anyone point me in the right direction? A second option would be that someone has an original plug that they could measure the blade length, width, thickness, distance between blade centres and distace between rows.
Any help appreciated.
Al
I have run into a bit of a brick wall with the Jones and Painton series of plugs and sockets. There seems to be confusion about which is which. This is complicated even further by references to a 'miniature' Jones series. The links below explain the problem better than I can.
https://www.belfuse.com/product-detail/i...ones-plugs
https://www.vintage-radio.net/forum/show...p?t=138553
https://www.vintage-radio.net/forum/show...p?t=111661
So far I have been unable to track down a spec sheet or dimensional drawing of the original series as used on T1154/R1155 etc. Can anyone point me in the right direction? A second option would be that someone has an original plug that they could measure the blade length, width, thickness, distance between blade centres and distace between rows.
Any help appreciated.
Al
Tuned for maximum smoke . 
