03-05-2018, 12:41 PM
Hi.
When I go into the shed the order of things are thus:
1, Turn on the lights.
2, Put the heater on if its cold.
3, Switch on the bench power which includes the isolating transformer and direct feed for the test equipment including the scope which incidentally is used every day.
4, Go back indoors for the piddle I needed before going into the shed!!!!!!
When I go into the shed the order of things are thus:
1, Turn on the lights.
2, Put the heater on if its cold.
3, Switch on the bench power which includes the isolating transformer and direct feed for the test equipment including the scope which incidentally is used every day.
4, Go back indoors for the piddle I needed before going into the shed!!!!!!
