25-02-2018, 04:29 AM
Hi Folks, a good reply by Sam. For shorts within the armature winding an AC "Growler " works well if you can find one.
It is not unknown for a wire to break under the "banding" (sometimes string) that covers the riser wires from the comm to the actual winding in the slots.
This usually leaves tell-tale signs on the comm.
Ed
It is not unknown for a wire to break under the "banding" (sometimes string) that covers the riser wires from the comm to the actual winding in the slots.
This usually leaves tell-tale signs on the comm.
Ed
