21-02-2018, 11:32 AM
(This post was last modified: 21-02-2018, 11:39 AM by Murphyv310.)
I'd be getting the scope on and seeing what is going on, especially with signal applied and the amp screwed right up, might be a bit of a shock, especially if these resistors are not decoupled.
Let the capacitors deal with spikes and high AC content from the audio not just the resistors.
One other thought. If the Amp has NFB its possible you have too much and the amp is subsonically oscillating that could stress the resistors.
Let the capacitors deal with spikes and high AC content from the audio not just the resistors.
One other thought. If the Amp has NFB its possible you have too much and the amp is subsonically oscillating that could stress the resistors.
