Point taken about the screen control pot, I will be bringing the radio up slowly on a variac and checking the voltages at various stages.
If the HT comes up too much, (the output valve was a bit low on emissions when I tested it) I may have to make adjustments to R2. I assume the pot I used was .25w one, so I guess I will be looking for the voltage on C14 to be not much above 180v
Mike
If the HT comes up too much, (the output valve was a bit low on emissions when I tested it) I may have to make adjustments to R2. I assume the pot I used was .25w one, so I guess I will be looking for the voltage on C14 to be not much above 180v
Mike
