27-11-2017, 08:15 PM
It has taken 2 days solid, dawn till dusk, but I have now got a clear drawing of the schematic for the KB 214 Transportable.
It is only a second draft, the first one was abandoned as the layout was not working well, too many lines crossing etc. There are still some capacitors to drill the rivets out of, so they can be removed and re-stuffed, the values of those are not shown yet..
If anyone fancies taking a look and comparing it to the original sketches I did in posts #29, 30, & 31, and point out any errors I would be very obliged.
I dont suppose many people will have a need for this schematic in the future, but at least it is done now.
(whats the bet an official one turns up now I have made this one.
)
Mike
It is only a second draft, the first one was abandoned as the layout was not working well, too many lines crossing etc. There are still some capacitors to drill the rivets out of, so they can be removed and re-stuffed, the values of those are not shown yet..
If anyone fancies taking a look and comparing it to the original sketches I did in posts #29, 30, & 31, and point out any errors I would be very obliged.
I dont suppose many people will have a need for this schematic in the future, but at least it is done now.
(whats the bet an official one turns up now I have made this one.
)Mike
