07-11-2017, 06:29 PM
(This post was last modified: 07-11-2017, 06:30 PM by Murphyv310.)
Hi.
Thanks Mark for your reply.
I've taken some pictures of the work so far. As you'll see the "lid" was off the IF can on receipt so may have been part of the issue as to the damage to the ferrite and connections. Actually the diode can be checked without dismantling the can and they are a reliable component.
I'm sure after another can is fitted as we have good signal levels to the base of the last transistor, all the transistors are AF117's now and they have all had a "just in-case flash"
Next instalment on Friday
