Using "Z" Mod on a scope.

[Murphyv310]

                               
Thread Revival!!!!
Spurred on by my "Winter Project" I have tried the Sync output on the old Aurora for mechanical systems onto the scope with some success.
The output of the Aurora for mechanical sync is a sine wave to basically lock up the motor, with just a simple clipping circuit reasonable lock can be obtained, even the frame can be held steady, the 1881 chip giving out some rather weak pulses.
The Photos are off screen and from 30 lines to 120 lines, all mechanical, two can be seen rotated due to vertical scanning which as yet I have not tried an XY as yet.