25-08-2017, 01:33 PM
Hi.
As can be seen in the pictures some of the rubber wiring was past its use by date.
I have sleeved some and a couple of them have been substituted, on bad bits I have used heat shrink then sleeved the cable with the grey stuff.
I also sleeved the leads to the upper smoothing choke as the hole in the chassis has no grommet.
The radio is running nicely at the moment but there is still some work to be done, the miniature valve mod isn't neat and I am going to replace two carbon resistors that I don't like. All work in progress.
