16-07-2017, 01:59 PM
(This post was last modified: 16-07-2017, 02:00 PM by boater sam.
Edit Reason: correction
)
If reusing carbon dogs I cook them first to make sure they are dry and stabilize them.
To up the value to what you need I file notches in them. If a big notch or several is needed I cover the body with the correct colour of heatshrink, then paint the bare end & tip and spot and test, so far they are OK.
To up the value to what you need I file notches in them. If a big notch or several is needed I cover the body with the correct colour of heatshrink, then paint the bare end & tip and spot and test, so far they are OK.
Boater Sam.
