02-07-2017, 05:17 PM
(This post was last modified: 02-07-2017, 05:20 PM by peter scott.)
Hi Trevor,
The Modeline Editor written by Jeroni Paul doesn't work with all combinations of graphics card and Windows revision. The problem with only having one display and that being experimental, is that you may find it difficult to mess with if your settings don't give you an intelligible screen.
Two port graphics cards are dirt cheap so I would advise going down that route. If your PC has a PCIe x16 motherboard slot and you are using XP then I can probably give you a card that is no use to me. It's an Nvidia NVS290
![[Image: s-l1600.jpg]](http://i.ebayimg.com/images/g/GFEAAOSwEzxYZ5fy/s-l1600.jpg)
The only thing you will need to buy is a splitter cable taking you from the DMS-59 connector to two normal VGA connectors.
![[Image: s-l400.jpg]](https://i.ebayimg.com/images/g/2i0AAOxyUylTPoxO/s-l400.jpg)
Peter
The Modeline Editor written by Jeroni Paul doesn't work with all combinations of graphics card and Windows revision. The problem with only having one display and that being experimental, is that you may find it difficult to mess with if your settings don't give you an intelligible screen.
Two port graphics cards are dirt cheap so I would advise going down that route. If your PC has a PCIe x16 motherboard slot and you are using XP then I can probably give you a card that is no use to me. It's an Nvidia NVS290
The only thing you will need to buy is a splitter cable taking you from the DMS-59 connector to two normal VGA connectors.
Peter
