06-05-2017, 10:06 PM
Replacement HT smoothing capacitors were fitted yesterday. There was five 16mfd capacitors on the bracket, two were connected in parallel for 32mfd. The original capacitors were useless and have been replaced with three new 16 +16mfd dual capacitors. Examination of the circuit diagram reveals that there is two paper dielectric capacitors wired across the HT supply. The capacitors are marked in the EMI service manual as C25 and C65, these will almost certainly be leaky so must be located and replaced.
Geordie McBoyne.
Geordie McBoyne.
