01-05-2017, 08:33 PM
Yes, I guessed those were DCR readings - 3 ohms sounds about right for a 4 ohm system. But it's all very approximate at the best of times, given how the impedance shoots up and down as you vary the frequency...
The service data for these is on the Hacker Audio Yahoo group: https://groups.yahoo.com/neo/groups/hack...group/info - note there are a few possibilities, depending on the exact model you have there.
The service data for these is on the Hacker Audio Yahoo group: https://groups.yahoo.com/neo/groups/hack...group/info - note there are a few possibilities, depending on the exact model you have there.
