05-04-2017, 05:27 AM
There is no point in measuring voltage between points that aren't connected to the same winding. As established by resistance checks without power connected. Such measurements will only confuse both you and us.
Using a DVM to measure between unconnected windings will give all sorts of spurious readings due to stray capacitance between the windings. Yes, an AVO7 should read zero on all such measurements but that's not the point, the "measurements" shouldn't have been made in the first place.
Using a DVM to measure between unconnected windings will give all sorts of spurious readings due to stray capacitance between the windings. Yes, an AVO7 should read zero on all such measurements but that's not the point, the "measurements" shouldn't have been made in the first place.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
