13-03-2017, 09:23 AM
I think that is correct Trevor but even McPherson strut front ends can go out, modern crumple zone steel will distort very easily and it is surprising how much tolerance there is still in shell assembly despite the robots.
I saw a Cortina years ago with 2 doors on one side and 1 on the other, had an Avenger that after a minor tap at the rear was 14mm longer on the SAME side, because the front was wrong! I know these are years ago but there are still errors made, like the new Fiat with a long A screen post!
I saw a Cortina years ago with 2 doors on one side and 1 on the other, had an Avenger that after a minor tap at the rear was 14mm longer on the SAME side, because the front was wrong! I know these are years ago but there are still errors made, like the new Fiat with a long A screen post!
Boater Sam.
