11-03-2017, 10:26 AM
Good point so need to check for rotation marks first. If they have them swap front to back on the same side only. If not then they can be done diagonally. This is from the handbook.
Seems a good idea to do this first before the tracking as the vehicle, at least for the front, would be standing on the ground squarely. Trying to get advice on this from other sources.
thanks Gary
Seems a good idea to do this first before the tracking as the vehicle, at least for the front, would be standing on the ground squarely. Trying to get advice on this from other sources.
thanks Gary







