09-03-2017, 04:34 PM
(This post was last modified: 09-03-2017, 04:38 PM by ppppenguin.)
Winobj runs just fine. But there's no Harddisk4, just 0-3.
Under Global??
C: is a symlink \Device\harddiskVolume2
D: is a symlink \Device\harddiskVolume3
E: and F: are CDroms as expected
V: and W: are \Device\harddiskVolumes 4 and 5
I think these are related to the USB hub in one of the monitors which I use. Unplugging the USB from the monitor makes V and W disappear both from Winobj and Disk Management.
PS: Just found DR4. It's under Harddisk2. Which is the C: drive as previously found.
PPS: Is it worth mirroring the C: drive on to another physical drive (I have a spare SSD and 512GB conventional drives). I have used Aomei Backupper to do backups and drive clones. Seems to work well.
Under Global??
C: is a symlink \Device\harddiskVolume2
D: is a symlink \Device\harddiskVolume3
E: and F: are CDroms as expected
V: and W: are \Device\harddiskVolumes 4 and 5
I think these are related to the USB hub in one of the monitors which I use. Unplugging the USB from the monitor makes V and W disappear both from Winobj and Disk Management.
PS: Just found DR4. It's under Harddisk2. Which is the C: drive as previously found.
PPS: Is it worth mirroring the C: drive on to another physical drive (I have a spare SSD and 512GB conventional drives). I have used Aomei Backupper to do backups and drive clones. Seems to work well.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
