22-02-2017, 07:55 PM
Resistors arrived from RS today I used 2x 200meg in series and a 100kohm soldered wrapped Ptfe round soldered joints then shrink down.
This is inside a Dmm plastic probe. Then put inside another plastic tube and finally inside another plastic tube.
So one end has the probe.
The other has red lead from junction of last 200meg and 100k resistors and the other end of the 100k has 2 leads 1 gnd 1 neutral.
Still waiting for other parts. Hopefully be here tomorrow.
I will solder the connections Craig before I take measurements as you suggested.
This is inside a Dmm plastic probe. Then put inside another plastic tube and finally inside another plastic tube.
So one end has the probe.
The other has red lead from junction of last 200meg and 100k resistors and the other end of the 100k has 2 leads 1 gnd 1 neutral.
Still waiting for other parts. Hopefully be here tomorrow.
I will solder the connections Craig before I take measurements as you suggested.
