07-02-2017, 04:48 PM
Some advices:
Check all coils in the PCB for continuity. I had had to repair some sets with open coils.
Forget audio at this stage. Connect the scope at the output of the demodulator and see if there is audio signal there. Once you get signal at that point, the rest is easy.
Nowhere-Man Wrote:I don't think my Astrad has worked in many years.Which means that probably there would be some transistor with broken legs. Had you checked that all transistors have their legs intact?
Check all coils in the PCB for continuity. I had had to repair some sets with open coils.
Forget audio at this stage. Connect the scope at the output of the demodulator and see if there is audio signal there. Once you get signal at that point, the rest is easy.
When electrons move, things happen.
There's nothing you can do that can't be done
There's nothing you can do that can't be done
