09-11-2016, 08:01 PM
Hi Ed, 2 generators used with this setup, for 40KHz to 50MHz use TF1246; for 20 to 300MHz use TF 1247.
These are quite powerful oscillators as the bridge needs quite a few drive volts.
I thing the manuals etc are on line. There is also a set of standard coils available to check the bridge against.
Ed
These are quite powerful oscillators as the bridge needs quite a few drive volts.
I thing the manuals etc are on line. There is also a set of standard coils available to check the bridge against.
Ed
