26-08-2016, 09:27 AM
I've never found paste to be all that easy to use - plus it doesn't keep very long. Regular 60:40 solder, but the fine stuff, and a small conical tip works for me. You'll need a bit of desoldering braid to remove the excess, and liquid flux can help (clean it up afterwards - even the "no clean" stuff). Being able to see is the really critical part of the job - in addition to the earlier suggestions, those cheap plastic loupes are quite good for inspection afterwards. And USB microscopes can be good fun as well.
Lots of good videos on YouTube - there are many different approaches and it's fun to watch the experts at work. Ultimately, you'll develop your own way of working, so don't feel that you have to rigidly follow anyone else. Most importantly, don't be afraid of it - just give it a go.
Lots of good videos on YouTube - there are many different approaches and it's fun to watch the experts at work. Ultimately, you'll develop your own way of working, so don't feel that you have to rigidly follow anyone else. Most importantly, don't be afraid of it - just give it a go.
