25-08-2016, 11:40 PM
It's not too difficult.
I've got one of those 'On your Head' Magnifier' things.
Buy some Solder Paste in a Syringe. Put a dab on each Pad. Put the Component on the Pad and hold it down with a sharp Pointer - I use Tweezers.
Using a sharp Bit in your Soldering Iron to melt the Solder at each end.
Works OK.
Alan
I've got one of those 'On your Head' Magnifier' things.
Buy some Solder Paste in a Syringe. Put a dab on each Pad. Put the Component on the Pad and hold it down with a sharp Pointer - I use Tweezers.
Using a sharp Bit in your Soldering Iron to melt the Solder at each end.
Works OK.
Alan
