14-06-2016, 02:11 PM
It doesn't seem to have been completed - there are three connections from the mains transformer, by the look of it, to a terminal block that goes nowhere!
Particularly worrying is that all the wiring passing through the chassis are in small holes with sharp edges and no trace of a grommet anywhere ...
Presumably those output terminals are some sort of miniature multi-pin plug and socket. They won't have much of a current carrying capacity, surely, and the breakdown voltage is unlikely to be very high.
I still think you will have to trace out the circuit to really find out what is going on or what is supposed to happen, then post it here for additional comment.
Then strip the thing down to its component parts, ream out and insulate the holes in the chassis, fit more suitable connectors and re-build it!
Particularly worrying is that all the wiring passing through the chassis are in small holes with sharp edges and no trace of a grommet anywhere ...
Presumably those output terminals are some sort of miniature multi-pin plug and socket. They won't have much of a current carrying capacity, surely, and the breakdown voltage is unlikely to be very high.
I still think you will have to trace out the circuit to really find out what is going on or what is supposed to happen, then post it here for additional comment.
Then strip the thing down to its component parts, ream out and insulate the holes in the chassis, fit more suitable connectors and re-build it!
