09-05-2011, 10:33 PM
I used a standard rotary - it sits right at the low-voltage side and passes very small currents so anything will do.
PM me if you need any help constructing, or need the Visio original circuit.
BTW I used an old DVM module I had to hand but one of the newer ones with backlight would have been a LOT better in dim workshop light!
Jeremy
PM me if you need any help constructing, or need the Visio original circuit.
BTW I used an old DVM module I had to hand but one of the newer ones with backlight would have been a LOT better in dim workshop light!
Jeremy
