07-03-2016, 07:21 PM
(This post was last modified: 07-03-2016, 07:32 PM by ppppenguin.)
Got the stainblock paint on the kitchen ceiling. Actually solvent based undercoat which I had in stock and works perfectly well. The neat way is an aerosol can of Zinsser BIN123. It works like a charm on all sorts of nasty surfaces and dries quickly. But I didn't have one and I did have the undercoat.
I'll get the white emulsion on tomorrow or Wednesday.
I've also topped up the inhibitor Will think about best way to clean out system. An acid clean like DS9 will give a lovely clean system but some of the rads are old and might suffer. I've seen what can happen with just a powerflush and old rads. Rust held together by paint = flood. About a year after the powerflush as it happens. Acid can only make it worse. I wonder if Sentinel X400 or X800 would do a decent job?
I'll get the white emulsion on tomorrow or Wednesday.
I've also topped up the inhibitor Will think about best way to clean out system. An acid clean like DS9 will give a lovely clean system but some of the rads are old and might suffer. I've seen what can happen with just a powerflush and old rads. Rust held together by paint = flood. About a year after the powerflush as it happens. Acid can only make it worse. I wonder if Sentinel X400 or X800 would do a decent job?
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
