06-03-2016, 01:03 PM
You just have to look at the manufacturer's data to establish case sizes, etc. Easily available on the big suppliers like CPC, Farnell, RS, etc. Perhaps not so easy if you're using eBay...
If eBay is your preferred source, please be aware that there are a *lot* of sub-standard fake components out there. A tight budget is understandable, but beware of "false economy". If you can only afford cheap radials from eBay at the moment, I'd wait until finances improve rather than doing a sub-standard job.
Just my personal opinion
PS: You didn't respond to my question about the existing caps. You might not need to change them at all...
If eBay is your preferred source, please be aware that there are a *lot* of sub-standard fake components out there. A tight budget is understandable, but beware of "false economy". If you can only afford cheap radials from eBay at the moment, I'd wait until finances improve rather than doing a sub-standard job.
Just my personal opinion
PS: You didn't respond to my question about the existing caps. You might not need to change them at all...
