03-02-2016, 07:17 PM
I might have posted this 'photo before, anyways it's here again, done with the cordless on a fully charged 18 volt lithium job.
Holes made with a 65mm hole saw, timber was some 2" ugly fast grown fibrous Sitka (Tanalised) the uncompleted cut on the right hand side was half way though when the charge expired:
Lawrence.
Holes made with a 65mm hole saw, timber was some 2" ugly fast grown fibrous Sitka (Tanalised) the uncompleted cut on the right hand side was half way though when the charge expired:
Lawrence.
