27-01-2016, 10:53 AM
Yes. You have to do things with the buttons to set it off in its auto-cal procedure - that should be explained in a PDF I linked to in a previous conversation. At first, you short the 3 test points together, and later in the procedure you are prompted to remove the links and install a capacitor (100n or greater, non-electrolytic).
Obviously, you can get an idea of how well it's performing by testing a range of resistors. If you want to be sure, low-value resistors can be put in series with a large film cap (or preferably several in parallel).
Obviously, you can get an idea of how well it's performing by testing a range of resistors. If you want to be sure, low-value resistors can be put in series with a large film cap (or preferably several in parallel).
