04-05-2011, 11:40 AM
personly in valve gear itend to allow 15% some times 20% depends on what the do remenber most corbon resistors in vintage radios were +-10% anyway also because they used e12 values they chose the nearest preferd value.not much help i know
voltage readings will give a good idea of what need changing . the lower the value the more inportant the value is near. all this is in my opinion only others will dissagree
rob t
voltage readings will give a good idea of what need changing . the lower the value the more inportant the value is near. all this is in my opinion only others will dissagree
rob t
if its made by hand it can be repaired by hand
