Well done, it is surprising how difficult it is to find a fault like a little wisp of wire touching where it shouldn't.
It may be possible manufacturers fitted components into "modules" like your double tag strip, and then fitted these into the set. It may have saved time.
This is a component board in a radio I am repairing at the moment, I would not be surprised if this was assembled outside the set and then wired in. There is another row of solder tags for the other end of the component leads the opposite side of the board (which indecently is only made of cardboard) hidden under the rest of the wiring. But this method of fitting components is probably easier to work on whilst carrying out repairs than the tag strips you had in the HMV.
Mike
It may be possible manufacturers fitted components into "modules" like your double tag strip, and then fitted these into the set. It may have saved time.
This is a component board in a radio I am repairing at the moment, I would not be surprised if this was assembled outside the set and then wired in. There is another row of solder tags for the other end of the component leads the opposite side of the board (which indecently is only made of cardboard) hidden under the rest of the wiring. But this method of fitting components is probably easier to work on whilst carrying out repairs than the tag strips you had in the HMV.
Mike
