25-11-2015, 08:00 PM
(25-11-2015, 01:40 PM)unrealdave Wrote: Does anyone have any idea how to clean the detector? I think its aluminium and vinegar might not be the best thing? It also looks fragile and I don't want to break anything !
Various methods come to mind, but one problem with chemical cleaning of brass is that of risking de-zincification - removing zinc from the surface, changing the appearance of brass to that of copper. Some options that come to mind are:
Brass and copper dipping solution such as this:
http://www.ebay.co.uk/itm/Antiquax-Brass-and-Copper-Bath-Cleaner-Solution-Dip-Simply-Add-Water-Deep-Clean-/291434564362?hash=item43dada8b0a:g:OGQAAOSwymxVL7-T
Fabric Stain Remover, such as 'Wizz Oxi' sold by Poundland. (Excellent on speaker fabric by the way).
Fabric stain remover is sometimes used by metal detectorists as an electrolyte when cleaning by electrolysis.
Electrolysis is a simple DIY technique which might also be worth trying.
Here's an example of cleaning a badly caked small steam cylinder. Might look a bit brutal and note the dezincification, but the end result looks good:
https://www.youtube.com/watch?v=N-7CkcslIWQ
Much depends on how much of the 'patina' you wish to preserve, or whether you want to remove that and make it look shiny and 'as new'.
I have commercial ultrasonic bath which removes dirt but doesn't for example make brass look shiny and new.
You might like to use say the pins from old 3-pin 13A plugs to see what the effects of different processes as, rather than to use the parts of the actual detector.
Just a few thoughts on which to ponder Dave.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'







