11-11-2015, 10:48 AM
With regard to the EM34 display, you may find that without a decent external aerial, the signal strength is insufficient for the AGC to operate or give enough voltage swing. I thought I'd got a duff magic eye on a 'Fenman 1' so obtained a new one, to no good effect. I thn made a simple magic eye tester which proved that both the old and new eye were fine. I then connected an external aerial and the magic eye then worked fine in the set.
Good luck with the restoration Sam - assuming that you're still in the Northen Hemisphere!
If not, I guess this set won't be a 'winter project' but a Spring one.
Good luck with the restoration Sam - assuming that you're still in the Northen Hemisphere!
If not, I guess this set won't be a 'winter project' but a Spring one.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'







