28-10-2015, 08:15 PM
Hi Andy, it will electrically replicate the HT and LT power units, no rotary converters and a single phase input.
Added to the mix are HT and EHT metering (V&A) as well as a DF meter and the external aerial ammeter. The front of the case has been laser "fretworked" with an RAF logo for the speaker aperture.
An LS and 6V6 output stage has been added as has a stabilised HT supply to help with drift.
Cables feed from the rear of the unit with connectors for the Tx and Rx.
The 1154 is designed to sit on top of it with the 55 by the side.
Pretty packed with transformers and caps inside.
Mike, the guy I'm building it for may well be at the Golbourne meet. He already has a PSU I built earlier for his KW2000
Ed
Added to the mix are HT and EHT metering (V&A) as well as a DF meter and the external aerial ammeter. The front of the case has been laser "fretworked" with an RAF logo for the speaker aperture.
An LS and 6V6 output stage has been added as has a stabilised HT supply to help with drift.
Cables feed from the rear of the unit with connectors for the Tx and Rx.
The 1154 is designed to sit on top of it with the 55 by the side.
Pretty packed with transformers and caps inside.
Mike, the guy I'm building it for may well be at the Golbourne meet. He already has a PSU I built earlier for his KW2000
Ed
