27-10-2015, 05:45 PM
(This post was last modified: 27-10-2015, 05:45 PM by AlanBeckett.)
Nick,
The Meter is doing what it should.
If you work your way down the Terminals they should read a progressively greater value - originally 1.5V for each 'Step'.
If you want it to be (possibly) more 'Logical put the Meter Negative in the + Terminal and measure the Sockets with the Positive Prod in the Terminals. They'll read Negative - I assume your Meter will do that.
That's how the Valves 'See' it when the GB Battery Positive is connected to Chassis/HT Negative ie the Grids will be Negative to the Filaments.
Alan
The Meter is doing what it should.
If you work your way down the Terminals they should read a progressively greater value - originally 1.5V for each 'Step'.
If you want it to be (possibly) more 'Logical put the Meter Negative in the + Terminal and measure the Sockets with the Positive Prod in the Terminals. They'll read Negative - I assume your Meter will do that.
That's how the Valves 'See' it when the GB Battery Positive is connected to Chassis/HT Negative ie the Grids will be Negative to the Filaments.
Alan
