22-10-2015, 11:17 AM
Splendid. I couldn't do without my Lathe and Drill etc 
A bit of gentle drilling and gluing should extend the front Pot OK.
The Colvern Pots would be OK for the 'Back' one.
I expect there's plenty of Chinese ones but getting at the back of the Spindle might not be very easy.
Alan
A bit of gentle drilling and gluing should extend the front Pot OK.
The Colvern Pots would be OK for the 'Back' one.
I expect there's plenty of Chinese ones but getting at the back of the Spindle might not be very easy.
Alan
