15-10-2015, 07:11 PM
Eveining Phil,
That first set of Test Conditions look. I wouldn't bother with the second set yet.
You could use something like this:-
I wouldn't bother with any metal bashing unless you're keen, just tack the wires on to a Base.
Make sure you've got all the Voltages right before you turn the Heater on otherwise you may damage the Valve.
Where are you getting the 250 Volts from?
Alan
That first set of Test Conditions look. I wouldn't bother with the second set yet.
You could use something like this:-
I wouldn't bother with any metal bashing unless you're keen, just tack the wires on to a Base.
Make sure you've got all the Voltages right before you turn the Heater on otherwise you may damage the Valve.
Where are you getting the 250 Volts from?
Alan
