17-09-2015, 10:25 AM
As you say, Terry 'Read the Instructions!'
The photos are of an adapter I made up for use with a 108SR, and incorporating the components recommended by Mark. The 3rd & 4th. pictures are essentially the same, except that I reduced the value of the series resistors from 3k3 to 820 ohms to improve the sensitivity of the aux. input.
The photos are of an adapter I made up for use with a 108SR, and incorporating the components recommended by Mark. The 3rd & 4th. pictures are essentially the same, except that I reduced the value of the series resistors from 3k3 to 820 ohms to improve the sensitivity of the aux. input.
