05-09-2015, 01:07 AM
Yes they did.
If you order more than there stock they tend to be able to get more pretty quickly and ship them on. They must have contact with a big wholesale broker that we don't know about.
I have made a start on the main challenge of getting into all those stacked components and it has made a huge improvement to the voltages and distortion levels.
It is pretty cramped in there and one of the worst of the leaky capacitors is indeed the one at the bottom of the stack.
It was so cramped that one of the pots had to come out to get that challenging bottom capacitor out so it was not an easy job at all.
Those metal can capacitors reach a certain voltage and then take currant if you go any higher like a shunt regulator.
They had to come out.
The wax one has a clear sleeve over it and is across one of the tone control pots so it will not matter.
The G1 to earth one in the phase splitter was causing loads of distortion.
The other channel will have to wait till tomorrow.
If you order more than there stock they tend to be able to get more pretty quickly and ship them on. They must have contact with a big wholesale broker that we don't know about.
I have made a start on the main challenge of getting into all those stacked components and it has made a huge improvement to the voltages and distortion levels.
It is pretty cramped in there and one of the worst of the leaky capacitors is indeed the one at the bottom of the stack.
It was so cramped that one of the pots had to come out to get that challenging bottom capacitor out so it was not an easy job at all.
Those metal can capacitors reach a certain voltage and then take currant if you go any higher like a shunt regulator.
They had to come out.
The wax one has a clear sleeve over it and is across one of the tone control pots so it will not matter.
The G1 to earth one in the phase splitter was causing loads of distortion.
The other channel will have to wait till tomorrow.
