13-08-2015, 06:49 AM
I have used superglue on many valves to reattach them to their base, but I only put a couple of small drops on either side of the base, not had any problem with cracking.
Araldite is so messy and does not run well, and always seems to stay gummy even when mixed well.
PVA glue is another favourite of mine and mixed with a blob of superglue sets to a jell in a matter of seconds, and then sets hard in a few hours. Whilst it is in its jell form it can be moulded to a degree.
Mike
Araldite is so messy and does not run well, and always seems to stay gummy even when mixed well.
PVA glue is another favourite of mine and mixed with a blob of superglue sets to a jell in a matter of seconds, and then sets hard in a few hours. Whilst it is in its jell form it can be moulded to a degree.
Mike
