15-07-2015, 07:38 PM
(This post was last modified: 15-07-2015, 07:39 PM by Ed_Dinning.
Edit Reason: added thought
)
Hi Nick, that sounds a good project. There are things like Lab Jacks that interface (isolated) to a PC and are low cost. They dump data into an XL file and graphs can be plotted directly from that.
It should also be possible to control the Sussex PSUs from a PC to step voltages etc.
I have a curve plotter circuit here from Electronic Engineering in the late 40's. It uses X-Y plotters and uniselectors to step the voltages.
It should make a good winter project if yoyu are not too busy with the house.
Plenty of ideas for projects in my tech library when you get over.
Ed
It should also be possible to control the Sussex PSUs from a PC to step voltages etc.
I have a curve plotter circuit here from Electronic Engineering in the late 40's. It uses X-Y plotters and uniselectors to step the voltages.
It should make a good winter project if yoyu are not too busy with the house.
Plenty of ideas for projects in my tech library when you get over.
Ed
