10-07-2015, 07:27 AM
(This post was last modified: 10-07-2015, 07:35 AM by Radio Fixer.)
It can be done: here is a PYE 350C that I restored including the front panel. The decals under many coats of lacquer, and skill is needed to do that, didn't look like decals. The only way you could / can tell is by looking at an angle against the light. Applying the lacquer needs starting with mist coats, else the decals crinkle, and then building up.
But what you need is someone with an Alpes thermal printer and most of those are in the US. You could try advertising on the AVR forum. That's where I found my guy who used to print a sheet from supplied artwork for a few dollars + postage. Alas, brilliant restorer that he was, he has now retired.
Gary
But what you need is someone with an Alpes thermal printer and most of those are in the US. You could try advertising on the AVR forum. That's where I found my guy who used to print a sheet from supplied artwork for a few dollars + postage. Alas, brilliant restorer that he was, he has now retired.
Gary
