23-06-2015, 10:21 AM
Well the UV lacquer arrived, I've given it a go, and have made a couple of PCBs with it.
Always a bit touch and go to get the exposure time right and the strength of the developer, but I usually manage to muddle through.
A 200 mL UV aerosol [allegedly] covers 2.5 sq M, roughly 27 sq ft, so that's about 48p a sq ft.
Surprised to find that Maplin were cheaper than anyone else for the same Electrolube UV lacquer, and free post too.
Always a bit touch and go to get the exposure time right and the strength of the developer, but I usually manage to muddle through.
A 200 mL UV aerosol [allegedly] covers 2.5 sq M, roughly 27 sq ft, so that's about 48p a sq ft.
Surprised to find that Maplin were cheaper than anyone else for the same Electrolube UV lacquer, and free post too.
Regards, David.
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
BVWS Member.
G-QRP Club Member 1339.
'I'm in my own little world, but I'm happy, and they know me here'
