13-06-2015, 09:33 PM
So, Waterslide. As I said above I've never used it before so I decided I'd better have a practice on half a Sheet. I suspect I over soaked it but I was surprised how delicate it was, at least this variety. Anyway, clearly it wasn't going to be practical to punch holes and drape it over the Terminals, so I took it all to bits again. That put a strong ache in the Nether Regions 
At least it gave me the opportunity to clean up the surface properly and take the sharp edges off.
My first effort was nearly successful. Unfortunately I tore it in a couple of places while I was trying to get it in the right place and in the end I decided it was beyond redemption so I abandoned it.
My second effort fell at the second hurdle. While I was spraying it a lot of Lacquer seemed to get under the edges - perhaps a duff Sheet, so I abandoned that one.
My third effort was just about acceptable.
So, it was just(?) a matter of lacquering it and putting it back together.
The eagle-eyed will spot that the Back is upside-down compared with the previous Pictures
I took it off and turned it round.
It's a long way short of perfect but it will do. I'm claiming it just looks 'Well used'
Alan
At least it gave me the opportunity to clean up the surface properly and take the sharp edges off.
My first effort was nearly successful. Unfortunately I tore it in a couple of places while I was trying to get it in the right place and in the end I decided it was beyond redemption so I abandoned it.
My second effort fell at the second hurdle. While I was spraying it a lot of Lacquer seemed to get under the edges - perhaps a duff Sheet, so I abandoned that one.
My third effort was just about acceptable.
So, it was just(?) a matter of lacquering it and putting it back together.
The eagle-eyed will spot that the Back is upside-down compared with the previous Pictures
I took it off and turned it round.
It's a long way short of perfect but it will do. I'm claiming it just looks 'Well used'
Alan
