Wilmac bandsaw restoration MKII

[Mark Hennessy]

Thanks for all the replies , so i need  x2 type   of the same rating  (0.047 uf 250v) .Most appear to be 275v ? Do they have to be the same type i.e paper film or will other be a better replacement.

If the replacement capacitor comes with a higher voltage rating, then that's absolutely fine.

Of course, the reverse might not be true

If the capacitor carries an "X2" rating, then it will be designed for continuous use across the 230V mains. Plastic film is a much better long-term bet than paper. And that's all you need to know about the capacitor

HTH,

Mark