25-01-2015, 07:15 PM
Doomed 
I ordered a new Box to match my existing one and some M2.5 Screws and Nuts for the holes.
I then did a Drawing - it's a bit tight due to the offset of the Display but a bit of jiggery-pokery fixed it. I considered turning it round to 'Landscape' but decided against.
I made my usual Pig's Ear of cutting out the hole and drilling but I figured it would do.
I mounted the Display with four CS Screws and Nuts.
Then I mounted the Main PCB and I've lost the bottom Row of the Top Line of the Display. I can't see anything wrong so I guess I've managed to bugger something.
I'm inclined to quit at this stage as I don't know which PCB has the problem. However, if anyone has a spare Display kicking about that would be the easy thing to try.
Gloom and despondency reigns.
Alan
I ordered a new Box to match my existing one and some M2.5 Screws and Nuts for the holes.
I then did a Drawing - it's a bit tight due to the offset of the Display but a bit of jiggery-pokery fixed it. I considered turning it round to 'Landscape' but decided against.
I made my usual Pig's Ear of cutting out the hole and drilling but I figured it would do.
I mounted the Display with four CS Screws and Nuts.
Then I mounted the Main PCB and I've lost the bottom Row of the Top Line of the Display. I can't see anything wrong so I guess I've managed to bugger something.
I'm inclined to quit at this stage as I don't know which PCB has the problem. However, if anyone has a spare Display kicking about that would be the easy thing to try.
Gloom and despondency reigns.
Alan
